Page 40 of 92 PAC L.P., All Rights Reserved, 2015
R6000S Operation Manual: Rev. G
POSSIBLE EXPLOSIVE ATMOSPHERE AND BURN HAZARDS!
DEATH OR SERIOUS INJURY COULD OCCUR IF NOT AVOIDED!
Furnace operates at a temperature in excess of 1000ºC and can serve as an
ignition or burn source.
HOW TO PROCEED: Ensure there are no explosive gases present in the
working area of the furnace. Ensure the furnace is not touched or exposed to
skin surfaces until the furnace cools down sufficiently.
2. Remove the top cover from the furnace module.
Figure 6. Pyrolysis Tube Installation
To Next Page
Loading...