Section 1
GENERAL AND SAFETY INFORMATION
- 5 -
English
F412010200.fmIDM
Rules for adjustment and maintenance
– Maintain the machine in perfect working order,
performing the scheduled maintenance required by
the manufacturer. Good maintenance will allow you
to achieve better performance, longer working life
and constant observance of safety standards.
– Before performing any maintenance or
adjustments, activate all safety devices provided
and evaluate whether or not it is necessary to inform
the personnel who are working on and around the
machine. In particular, place suitable signs around
the perimeter to prevent access to all those devices
that, if activated, could cause conditions of
unexpected danger, damaging the safety and health
of yourself and others.
– Maintenance and adjustments must be performed
by authorized personnel, who must provide all
necessary safety conditions and observe the
indicated procedures.
– All maintenance interventions that require a precise
skill or particular ability must be performed
exclusively by qualified personnel with recognized
experience earned in the specific intervention
sector.
– When performing maintenance in areas that are
dangerous or not easily accessible, provide
adequate safety conditions for yourself and others,
following current occupational safety law.
– Replace worn parts with original replacement parts.
Use the oils and greases shown in the manual. All
this will ensure that the system performs at the
expected operational and safety level.
– Do not discard polluting materials into the
environment; dispose of them with respect for
current law.
To Next Page
Loading...