42
Remote File Sharing allows you to access the contents of your USB drive remotely. To setup remote file
sharing take the following steps.
1. Click the Remote File Access tab.
2. Check the enable box.
3. The default username/password for remote file access will be fileshare/pakedger Note:
You can change the username and password used to remotely access the USB drive. Simply
enter the new credentials and click Apply.
4. Click Apply to finalize the settings.
5. To remotely access the USB drive enter the following into a web browser
https://PublicIPaddress:8443/mydisk.html
and press enter. Note: if you configured DDNS on
the router you can use that in place of the public IP address.
6. You will see a login screen similar to when you log into the router. Enter the credentials and
click Login.
To Next Page
Loading...
