Palas Fidas Frog - Exporting Measured Values

5Operation and settings
22 3577-en-us_V1.1_08/17
Notes This function is only available to you while a measurement is in progress.
To enter a comment, proceed as follows:
1. Tap the comment symbol
2. Enter a comment for the measurement
You can add multiple comments for a measurement.
5.13 Exporting measured values
You can store the measured values in various file formats. With the micro-
USB serial port, you can transfer the data to a USB data carrier for further
processing on an external computer.
The following file formats are supported:
• Text (.txt) for processing in Excel
• System file (.data.frog) for processing in PDAnalyze Fidas
To export measured values, proceed as follows:
1. Select the Analysis menu
2. Select the desired measurement from the list
If applicable, deactivate an existing selection with deselect
3. Export the measured values with export
4. Select the file format for the data export
5. Enter a file name
6. Select the folder for the data export
7. Accept the settings with Apply
The file is created.
You can access the file using the standard Windows Explorer func-
tions.