Check of control equipment
Note!
The entire safety equipment must be checked during servicing
(overload test, HPSC test, etc.).
Protective hoses
During servicing, check protective hoses, covers etc. and replace damaged and missing parts.
Repairs
• Damages to the unit must be repaired immediately by a PALFINGER partner.
• Repairs have to be recorded in the service manual.
• If a repair is not carried out by a PALFINGER partner warranty will become void.
Lowering rate
The lowering rate must not exceed 0.2 % of the outreach per minute.
123
To Next Page
Loading...