General
PALFINGER has developed safety systems that protect the operator and the unit in order to guarantee
safe operation.
Safety systems are adjusted before delivery of the unit to the operating company/operator.
Danger!
Any unauthorized manipulation to the safety devices leads to danger
of fatal injury.
Only PALFINGER service partners are allowed to set up and adjust the safety equipment.
Manipulating or inactivating these safety features is not allowed.
Danger!
In case of failure of any protective device, stop operating the unit
immediately and contact your PALFINGER partner. There is severe
risk of fatal injury!
Note!
Any warranty and liability of the manufacturer will expire if
unauthorized persons manipulate the safety features or seals are
broken.
On the operating company's/operator’s request the PALFINGER service partner has to replace any
missing or damaged seals immediately.
Emergency cut-off button / push-button
The emergency cut-off button / push-button stops all crane functions within 0.5 seconds (500 ms) after
activation in an emergency situation.
An emergency cut-off button can be found at every operating station and on the radio remote control
handset.
1. In a dangerous situation let go all operating elements immediately.
2. Actuate the emergency cut-off.
All crane functions stop.
To Next Page
Loading...