Labels for North America
Following labels are only used in USA and Canada. Operators have to read and understand all
additional labels.
Electrocution hazard (manual or manual / RRC control)
Position: Near the operator station.
Meaning: Shows minimum required distances to live electrical
power lines; remote control not insulated.
Risk if ignored: Death or serious injury.
Electrocution hazard
Position: On 4 sides of the vehicle.
Meaning: Bystanders keep distance from the crane/vehicle in case
of flash over.
Risk if ignored: Death or serious injury.
Never ride the boom or hoist people
Position: Near the operator station.
Meaning: Under no circumstances shall any personnel be
transported on a boom, hook, load, or any device
attached to the crane, boom or load line.
Risk if ignored: Death or serious injury.
34
To Next Page
Loading...