Caution! When the load is attached or detached by the operator
while the crane is still in operation this creates
• through unauthorized crane operation,
• by unintended actuation of control equipment on the
operator station or handset of the remote control
acute danger to life for the operator and others.
Load attached / detached by assistants:
• Assistant may enter the crane's danger zone only after the operator has given permission.
• Only attach/detach loads with permission from the operator and when the crane has stopped
completely.
• The assistant must leave the working area when attaching/detaching is completed.
After the assistant has left the danger zone, crane movements may be carried out again.
Load attached / detached by the operator:
In order to attach or detach the load, the operator may need to enter the working area.
• Turn off the crane on the crane’s operator station or on the remote control.
• Attach / detach the load.
• Exit the danger zone.
• Turn on the crane.
Lifting / moving loads
Warning! If loads, load handling attachment or ancillary equipment
rub against the load arm they may get damaged.
Load, load handling attachment or ancillary equipment must not rub against the load arm. Minimum
distance between all crane components and load 0.5m.
86
To Next Page
Loading...