Palm Centro - Page 62

YOUR PHONE
WHAT CAN I DO WHEN I’M ON A CALL?
62
4
CHAPTER
set up a conference session using
three-way calling.
• If you have two calls in conference,
press Send to hang up one of the
calls; you can then dial another
number and connect the new caller to
the conference session.
4 To exit Flash mode and end all the calls,
press Power/End .
Forwarding all calls
You can forward all your calls to another
telephone number.
Check with your wireless service provider
about the availability and pricing of
forwarding calls to another phone; call
forwarding is not available in all areas, and
additional charges may apply.
BEFORE YOU BEGIN Ask your wireless
service provider for call forwarding codes.
You need the codes if you want to enable
and disable call forwarding. You may also
need to modify the following steps based
on your wireless service provider’s
instructions.
1 Press Phone .
2 Enter the call–forwarding code,
followed by the number where you
want to forward your calls.
3 Press Send from Active Call View.
4 Call your smartphone to confirm that
call forwarding is active.
When you’re ready to turn off call
forwarding, open the Phone application
and enter the code to disable the call
forwarding feature.