Page 149 Setting Preferences for Your Handheld
Sample connection for remote
IR HotSync operations
The following sample configuration would enable you to perform an
IR HotSync operation by sending data through the IR port of a cell
phone, which then dials a modem attached to your computer, to
synchronize with your Desktop application. For this example, you use
the IrCOMM to Modem connection.
To create an IrCOMM to Modem connection:
1. Tap New.
2. Enter a name to identify this configuration.
3. Tap the Connection Method pick list and select IrCOMM to
Modem.
4. Tap the Dialing pick list and select TouchTone or Rotary.
5. Tap the Volume pick list and select the speaker volume you want
to use.
6. Tap Details.
7. Enter the initialization string supplied by the documentation for
the modem attached to your cell phone.
Tap here
To Next Page
Loading...
Need help?
General
