Palm m100 User Manual

Page 187 Frequently Asked Questions
Beaming problems
Problem Solution
I cannot beam data to
another Palm OS
handheld.
■
For best results, Palm m100 handhelds
should be between 10 centimeters
(approximately 4 inches) and 1 meter
(approximately 39 inches) apart, and the
path between the two handhelds must
be clear of obstacles. Beaming distance
to other Palm OS handhelds may be
different.
■
Move your handheld closer to the
receiving handheld.
■
Make sure the Beam receive option is
enabled in General Preferences. See
“General preferences” in Chapter 6 for
more information.
■
Perform a soft reset. See “Performing a
soft reset” in Appendix A for more
information.
When someone
beams data to my
handheld, I get a
message telling me it
is out of memory.
■
Your handheld requires at least twice
the amount of memory available as the
data you are receiving. For example, if
you are receiving a 30K application, you
must have at least 60K free.
■
Perform a soft reset. See “Performing a
soft reset” in Appendix A for more
information.

Palm m100 Specifications

General

Brand	Palm
Model	m100
Category	Handhelds
Language	English