Palm Treo 700w - Page 112

104 Using Your Treo 700w Smartphone
CHAPTER 5 Staying in Touch
Synchronizing over an infrared connection
1. Set up your computer to receive infrared beams. See ActiveSync
Help on your computer for details.
2. Point your smartphone’s IR port directly at the IR port on your
computer.
3. On your smartphone, press Start and select Programs.
4. Select ActiveSync .
5. Press Menu and select Connect via IR.
6. Select Sync.
Tip
If you can’t receive
beamed info, press
Start and select
Settings. Select the
Connections tab, and
then select Beam.
Make sure the Receive
all incoming beams
box is checked. If you
still can’t receive info,
try a soft reset (see
“Resetting your
smartphone” on
page 197).