Using Your Treo 700w Smartphone 103
Beaming information with IR CHAPTER 5
Beaming a record
1. Highlight the entry or file you want to beam.
2. Press Menu and select Beam… (the menu item changes
names based on the type of item you highlighted).
3. Point the IR port on your smartphone directly at the IR port of the
receiving device.
4. When the name of the receiving device appears, select it to begin
the transfer.
5. Wait for “Done” to appear next to the name of the receiving device
before you continue using your smartphone.
Receiving beamed information
1. Turn on your screen.
2. Point your smartphone’s IR port directly at the IR port of the
transmitting device.
3. When the Receiving Data message appears, select Yes to receive
the beam.
To Next Page
Loading...
