12 Using Your Treo 700w Smartphone
CHAPTER 1 Getting Started
Making your first call
We recommend that you charge your Palm Treo 700w smartphone for a
full 3.5 hours (or until the indicator light is solid green) before using it
for the first time.
1. If you do not see your Today screen,
press Phone/Send .
2. If you haven’t already activated your
phone, follow these steps before
continuing:
• Use the number pad on the keyboard
to enter
*
228 (these numbers appear
on the ZRRC letter keys).
• Press Phone/Send to dial.
• Follow the voice prompts to activate
your phone. A service provisioning message appears.
• Wait a few minutes until you see the Programming Successful!
message, and then press Dismiss .
3. Use the number pad on the keyboard to
enter the number you want to call.
4. Press Phone/Send to dial.
5. When your call is complete, press Power/
End to end the call.
Before You Begin
[!]
Make sure your phone
is on (see “Turning
your phone on and
off” on page 11).
Tip
The Dial Lookup list
might appear while
you are dialing a
number. Continue
entering numbers to
place the call. For
more info on the Dial
Lookup list, see
“Dialing by contact
name” on page 37.
To Next Page
Loading...
