188 Using Your Treo 700w Smartphone
CHAPTER 9 Customizing Your Smartphone
1. Wake up your smartphone’s screen (see “Waking up the screen”
on page 11), and then insert the Wi-Fi card into the expansion slot
(“Removing and inserting expansion cards” on page 153).
2. Tap Wi-Fi in the title bar.
3. Select the Settings link.
4. Select Network Cards .
5. Select Add New.
6. On the General tab, set the following:
• Network Name: Specifies the SSID
provided by the system administrator.
• Connects to: Specifies whether this
connections connects to the Internet or
to Work. You may need to select Work to access a corporate
intranet.
• This is a device to device (adhoc) connection: Indicates
whether you’re connecting to another device or to an access
point (network).
7. Select the Network Key tab, and then set the following:
• Authentication: Sets the method
used to identify devices that connect to
the network.
— Open: Indicates the network uses
open authentication.
— Shared: Indicates the network uses
shared authentication.
To Next Page
Loading...
