Network preferences and TCP/IP software
153
To select a connection:
1. Tap the Connection pick list.
2. Tap the connection you want to use.
Adding telephone settings
When you select the Phone field, your handheld opens a dialog box in which you
define the telephone number you use to connect with your ISP or dial-in server. In
addition, you can also define a prefix, disable call waiting, and give special
instructions for using a calling card.
NOTE
The Phone Setup dialog box works correctly for AT&T and Sprint
long-distance services. However, because MCI works differently, MCI customers
need to put the calling card number in the Phone # field and the phone number in the
Use calling card field.
To enter your server phone number:
1. Tap the Phone field.
2. Enter the phone number for your ISP or dial-in server.
3. If you need to enter a prefix or disable call waiting, skip to those procedures.
Otherwise, tap OK.
Tap here to display a
list of available
connections
Enter your ISP phone
number here
To Next Page
Loading...
