Panasonic AG-AF100A - Remote Control Operation; Inserting Battery and Functionality; Recharging the Battery

23
Preparation Description
of parts
Remote control
To use the remote control, set the IR REMOTE item on the OTHER FUNCTIONS menu to ON. The default
setting for this item is OFF. (Page 62 of Vol.2)
The following buttons are for functions that
cannot be executed on this camera-recorder.
• button
1 EXT. DISPLAY button (Page 40 of Vol.2)
2 DATE/TIME button (Page 40 of Vol.2)
3 START/STOP button
Same function as the START/STOP button on
the camera.
4 ZOOM/VOL buttons (Page 40 of Vol.2)
5 PLAY button (Page 28 of Vol.2)
6 SEARCH buttons (Pages 28 and 39 of Vol.2)
7 PAUSE button (Page 28 of Vol.2)
8 STILL ADV buttons (Page 40 of Vol.2)
9 STOP button (Page 28 of Vol.2)
10 SKIP buttons (Pages 28 and 39 of Vol.2)
11 OPERATION buttons
Same function as the Operation lever on the
camera.
12 MENU button
Same function as the MENU button on the
camera.
13 PHOTO SHOT button (Page 13 of Vol.2)
Same function as the CAPTURE feature
assigned to a USER SW function on the
camera.
ZOOM
START/
STOP
PHOTO
SHOT
EXT
DISPLAY
DATE/
TIME
VOL
PLAY
STOPSKIP SKIP
MENU
ENTER
PAUSE
SEARCH
STILL ADV STILL ADV
SEARCH
3
4
6
8
1
2
5
7
8
9
10
11
6
10
12
13
Remote control usable range (Page 27)
Recharging the battery
Recharging
The battery does not come ready charged when the camera is purchased. Charge the battery before use.
It is recommended that you keep one extra battery as a spare.
1
Connect the power cord to the AC adaptor.
Disconnect the DC cord.
(Battery cannot be charged if DC cord is
connected.)
Insert until fully in place.
2
Insert the battery.
Charging lamp [CHARGE]
Align the battery with the
mark and insert fully.