Adjusting the hand strap
Adjust the hand strap to suit your hand.
1
Open the cover and adjust the length.
2
Close the cover.
Make sure the cover is fully closed.•
Attaching/detaching the handle
Detaching the handle
1
Use a Philips-head screwdriver and remove
the two screws.
2
Slide in the direction of the arrow.
The handle will detach.
Attaching the handle
Carry out the reverse of the detaching procedure to
attach the handle.
Ensure both screws are firmly fixed in place. •
When holding the handle, make sure the screws •
are not loose.
Screws
Attaching/detaching the grip
Detaching the grip
1
Use a Philips-head screwdriver and remove
the two screws.
2
Slide in the direction of the arrow.
The grip will detach.
Attaching the grip
Carry out the reverse of the detaching procedure to
attach the grip.
When attaching, ensure both screws are firmly •
fixed in place.
Screws
To Next Page
Loading...
