Panasonic AG-AF100A - Setting User Information

27
Shooting
Setting user information
Setting user information allows you to store 8-digit
information in the hexadecimal format.
User information is automatically saved in the
memory and retained after you turn off the power.
1
Set the POWER switch to ON.
2
In the setup menus, TC/UB SETUP screen,
select UB PRESET.
For menu operation (Page 44 of Vol.1)•
Operations may also be performed •
using buttons on the remote control that
correspond to those on the camera. For
details, see “Description of parts (Remote
control)”.(Page23ofVol.1)
3
Tilt the Operation lever in the direction to
move to YES, and push the Operation lever.
4
Set the user information.
Tilt the Operation lever in the
directions
and select user information characters.
You can use numbers from 0 to 9 and letters •
from A to F.
Tilt in the direction to move to the next digit,
and tilt in the
directions again to select
character.
You can reset the user information to nothing by
pressing RESET/TC SET button.
POWER
FOCUS
..
BARS
EVF DTL CH1 SEL
INT
(
L
)
ON
OFF
ON
OFF
INPUT1
AUDIO
MIC POWER +48V
INPUT1 INPUT2
INPUT2
INPUT1
INPUT2
CH2 SEL
WFM
COUNTER-RESET/TC SET
ZEBRA OIS
Camera
5
Push the Operation lever when you have
finished setting the user information.
6
Tilt the Operation lever in the direction to
move to YES, and push the Operation lever.