1
Set the POWER switch to ON. (Page 27)
2
Press the MENU button.
For menu operation (Page 44)•
Operations may also be performed •
using buttons on the remote control that
correspond to those on the camera. For
details, see “Description of parts (Remote
control)”. (Page 23)
3
Viewfinder adjustments
Set YES under EVF SET on the setting menu
DISPLAY SETUP screen.
LCD monitor adjustments
Set YES under LCD SET on the setting menu
DISPLAY SETUP screen.
4
Select the desired item by tilting the
Operation lever in the
directions, and
push the Operation lever.
5
Adjust the selected item by tilting the
Operation lever in the
directions.
6
Press MENU button to exit the menus.
The viewfinder display can be in color or black •
and white. (See the setup menus, DISPLAY
SETUP screen, EVF COLOR.) The resolution
is the same for both of them.
Adjusting the screen display
To Next Page
Loading...
