When outputting video and audio signals from the camera to an external device, connect to the ■
input terminals of the external device.
Use a double-shielded HDMI cable (not included). •
It is recommended that you use Panasonic’s HDMI cable.•
This product is not compatible with VIERA Link.•
Limitations of image output
■
When using SDIOUT output, side LCD and EVF cannot be operated simultaneously. In order to perform •
simultaneous operation, set the SDI OUT on the settings menu AV IN/OUT SETUP to OFF. When the
EVF MODE on the settings menu DISPLAY SETUP is set to AUTO, EVF disappears upon opening/
closing of the LCD.
No HDMI output is performed when REC FORMAT is set to 1080/24p and SDI 24Ps is set to ON. •
When SDI&HDMI OUT SEL is set to DOWNCONV, SIDE CROP is disabled in the DOWNCON MODE •
settings, and SQUEEZE is enabled automatically.
Some displays, such as time code display and audio level meter display may not be visible on the videos •
output from the VIDEO OUT terminal.
To Next Page
Loading...
