Panasonic AJ-HPX2100E - Page 144

144
Menu : Menu Description Tables
◆Note
The <DOWNCON SETTING> screen is displayed when
SYSTEM MODE is set to 1080-59.94i, 1080-50i, 720-
59.94P and 720-60P (HD mode).
The ____ in the Adjustable Range column indicates the
preset mode.
DOWNCON SETTING
Items/
Data Saved
Adjustable
Range
Remarks
DOWNCON
MODE
SQUEEZ
LT- BOX
S-CROP
For setting the mode of the down
converter output signals.
–CUFR
DETAIL
ON
OFF
For setting the detail function for the
down converter output signals ON/OFF.
The down converter output signals
contain detailed components that are
set during HD signal processing. In this
setting, these signals overlap the
detailed components dedicated to the
down converter outputs.
Even if this setting is turned off, it is
impossible to turn off the detailed
components set during HD signal
processing.
–CUFR
H.DTL LEVEL 00
:
08
:
31
For setting the horizontal detail
correction level for the down converter
output signals.
–CUFR
V.DTL LEVEL 00
:
04
:
31
For setting the vertical detail correction
level for the down converter output
signals.
–CUFR
DTL CORING 00
01
:
15
For setting the noise elimination level of
the details.
–CUFR
H.DTL FREQ. 1
:
3
:
5
For selecting the horizontal detail
frequencies.
1: 2.5 MHz 4: 4 MHz
2: 3 MHz 5: 4.5 MHz
3: 3.5 MHZ
–CUFR
2D LPF ON
OFF
For setting the 2-D low path filter
reducing cross colors.
ON: Cross colors are reduced.
OFF: Cross colors are not reduced.
–CUFR
SETUP
0%
7.5%
For setting the setup level for the down
converter output signals.
（Only for 1080-59.94i or 720-59.94i）
Note
When the system frequency is set to 50
Hz, the setup level will be 0%.
–CUFR
LCD MONITOR
Items/
Data Saved
Adjustable
Range
Remarks
BRIGHTNESS –7
:
+0
:
+7
Adjust the LCD monitor brightness.
–CUF–
COLOR
LEVEL
–7
:
+0
:
+7
Adjust the LCD monitor chroma level.
–CUF–
CONTRAST –7
:
+0
:
+7
Adjust the LCD monitor contrast.
–CUF–
BACKLIGHT
NORMAL
HIGH
Adjust the backlight
NORMAL : Mode normally used
HIGH: This is brighter than NORMAL
–CUF–
SELF SHOOT NORMAL
MIRROR
Select whether or not to change the
LCD monitor to mirror image.
NORMAL : Do not change to mirror
image.
MIRROR : Change to mirror image.
–CUF–
AJ-HPX2100E(English).book 144 ページ ２００６年１１月２７日 月曜日 午後４時３４分