145
Menu : Menu Description Tables
Menu
The ____ in the Adjustable Range column indicates the
preset mode.
GENLOCK
Items/
Data Saved
Adjustable
Range
Remarks
GENLOCK
INT
EXT
Switch the camera synchronising signal.
INT: Synchronise with the internal
reference signal regardless of the
reference signal input to the
GENLOCK IN connector.
EXT: Synchronise with the reference
signal input to the GENLOCK IN
connector.
–CUFE
GL PHASE
HD SDI
COMPOSIT
For selecting the output signals that lock
phases to the signals that are input in
the GENLOCK IN connector. (Only for
1080-59.94i, 1080-50i, 720-59.94P, or
720-50P
）
HD SDI:
For locking the HD SDI signals to the
GENLOCK input.
For the down converter output
signals, the start position of the video
delays by about 90 lines.
COMPOSIT:
For locking the down converter output
signals to the GENLOCK input.
For the HD SDI output signals, the
start position of the video gains by
about 90 lines.
–CUFR
H PHASE
COARSE
–50
:
+00
:
+50
Perform coarse phase adjustment for
horizontal hold when configuring a
system.
–––––
H PHASE
FINE
–160
:
+000
:
+160
Perform fine phase adjustment for
horizontal hold when configuring a
system.
Note
This adjustment simultaneously shifts
the SC phase.
–––––
1394 SETTING
Items/
Data Saved
Adjustable
Range
Remarks
1394 AUDIO
OUT
CH1/CH2
CH3/CH4
For selecting the channels for audio
signals output from the DVCPRO/DV
connector when the camera-recorder is
operating in DVCPRO or DV mode (for
480-59.94i or 576-50i only)
Note
When CH3/CH4 is selected, no sound is
heard in the following outputs:
z EE output if the 25M REC CH SEL
menu option on the MIC AUDIO
screen on the MAIN OPERATION
page is set to 2CH.
z Output of playback data recorded as
2-channel audio signals.
–CUF –
1394 SPEED S100
S200
S400
For setting the transfer rate of signals
output from the DVCPRO/DV connector.
S100:100Mbps
S200:200Mbps
S400:400Mbps
–CUF –
1394 IN CH 0
:
63
AUTO
For setting the input channel of signals
input to the DVCPRO/DV connector.
0 - 63: To fix to the designated value
AUTO: To follow the settings of the
externally connected devices
–CUF –
1394 OUT CH 0
:
63
AUTO
For setting the input channel of signals
output from the DVCPRO/DV connector.
0 - 63: To fix to the designated value
AUTO: To follow the settings of the
externally connected devices
–CUF –
1394
CONTROL
OFF
BOTH
For setting the control for recording
start/stop operations of external devices
that are connected to the DVCPRO/DV
connector.
OFF: Do not control the externally
connected devices.
BOTH:To control both the unit and the
externally connected devices
–CUF –
1394 CMD SEL REC_P
STOP
For setting the control of recording stop
operations of the external devices that
are connected to the DVCPRO/DV
connector.
REC_P: Operation to pause recording
STOP: Stopping operation
–CUF –
AJ-HPX2100E(English).book 145 ページ ２００６年１１月２７日 月曜日 午後４時３４分
To Next Page
Loading...
