Panasonic AJ-PX270 - Setting Menu Structure; Menu Types and How to Open Them; Main Menu Structure

– 125 –
Chapter 6 Menu Operations — Setting menu structure
Setting menu structure
Menu types and how to open them
Menu type Use How to open
[USER MENU]
In the main menu → [USER MENU SEL], you can select
the desired items and pages and register to [USER
MENU]. You can select them depending on the purpose or
frequency of use to make a unique menu structure.
For details, refer to “Setting [USER MENU]” (page 127).
Displayed by pressing the <MENU> button.
Main menu You can set all items in the setting menu.
The main menu has a structure of categorized layers
according to intended use and setting frequency.
Displayed by pressing and holding the <MENU> button for
three seconds or more.
[OPTION MENU] Menu items are prepared to take into account additional
functions in the future.
Please consult your vendor for more details.
Displayed by pressing the <MENU> button while pressing
and holding the <LCD BACKLIGHT> button.
Main menu structure
[SCENE FILE] Congures the settings for scene les.
This item is used to congure detailed image quality settings of the camera images, to select scene les, and to
congure the settings for reading/writing of scene le data to the internal memory.
This menu item cannot be set when the thumbnail screen is displayed.
[SYSTEM MODE] Congures the settings for the recording format of video and audio.
[USER SW] Sets the functions to be assigned to the USER buttons (USER1 to USER8).
[SW MODE] Congures the operations of each mode when switched the mode using each switch.
This menu item cannot be set when the thumbnail screen is displayed.
[AUTO SW] Congures the settings for the auto mode.
Auto iris, auto gain control, auto tracking white balance, and auto focus functions can be set separately.
This menu item cannot be set when the thumbnail screen is displayed.
[RECORDING SETUP] Congures various settings when performing recording and playback.
Set the system frequency, the number of lines, recording format, and recording method.
[CLIP] Used when performing various tasks, such as playing back, deleting, and copying clips, and editing metadata, while
checking the thumbnail of the clips displayed in the viewnder or LCD monitor.
This menu item is enabled when the thumbnail screen is displayed.
Clip operations such as [DELETE] or [COPY] are enabled when the target thumbnail is selected.
Some items are displayed only in specic situations such as in USB host mode or on the explorer screen.
[AUDIO SETUP] Congures the settings for audio input/output.
[OUTPUT SEL] Congures the settings for video output from the <SDI OUT>, <HDMI OUT>, <GENLOCK IN/VIDEO OUT>, and <TC IN/
OUT> terminals.
[NETWORK SETUP] Congures the settings for network.
[DISPLAY SETUP] Congures the settings for the details to be displayed in the viewnder or LCD monitor.
This menu item cannot be set when the thumbnail screen is displayed.
[CARD FUNCTIONS] Congures the settings for reading/writing of scene les and user les to SD memory cards.
[OTHER FUNCTIONS] Congures the settings for reading/writing of user les to internal memory and initialization, and the camera settings.
[MAINTENANCE] Used for performing maintenance of the camera. This item is used when updating the rmware version of the camera.
[DIAGNOSTIC] Displays the rmware version, product name, serial number, and energized time of the camera.
[USER MENU SEL] Sets the items to be displayed in [USER MENU].