Panasonic AJ-PX270 - Maintenance; Charging the Built-In Battery

– 200 –
Chapter 10 Maintenance and Inspection — Maintenance
Maintenance
Charging the built-in battery
The camera uses the built-in battery to remember the date and time.
If [BACKUP BATT EMPTY] is displayed on the viewnder or LCD monitor, the built-in battery is running out. Charge the built-in battery with the following
procedure.
1
Make sure that the power switch is <OFF>.
2
Connect the AC adaptor to the camera.
For details on the connection of AC adaptor, refer to “Using the AC adaptor” (page 27).
3
Leave the camera for approx. four hours.
The built-in battery will be charged.
After charging completes, set the date and time and check the time code. If [SET DATE AND TIME] is displayed on the viewnder or LCD monitor,
set the date/time of the internal clock. (page 33)
If [BACKUP BATT EMPTY] is still displayed after charging, the built-in battery needs to be replaced. Consult your dealer.