Panasonic AJ-PX270 - Handling Setting Data; Setting Data File Configuration; Handling SD Memory Cards

– 91 –
Chapter 4 Shooting — Handling setting data
Handling setting data
Setting data le conguration
Scene les with [F1:] to [F6:] can be saved on the camera according to the settings in the main menu → [SCENE FILE].
Scene le data ([F1:] to [F6:]) can be saved as a le, and up to eight les can be saved on the SD memory card at a time, which can be loaded and
used.
Setting menu values can be saved as one user le on the camera, and up to eight les can be saved on the SD memory card.
[USER MENU] settings registered with [USER MENU SEL] can also be saved on or loaded from the camera and the SD memory card at the same time
as a user le.
Setting data le structure of the camera is as follows.
r Scene le
*1 *1 *1 *1 *1 *1
*2 *2 *2 *2 *2 *2
*3
[F1:](Factory settings)
The camera
(Current value)
(Value saved on the camera)
[F2:] [F3:] [F4:] [F5:] [F6:]
[F1:] [F2:] [F3:] [F4:] [F5:] [F6:]
[F1:] [F2:] [F3:] [F4:] [F5:] [F6:]
[F1:]
SD memory card
Scene file 1
[F2:] [F3:] [F4:] [F5:] [F6:]
[F1:]
Scene file 8
[F2:] [F3:] [F4:] [F5:] [F6:]
*1 Select [INITIALIZE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE].
By scene le unit as selected in the main menu → [SCENE FILE] → [FILE SELECT]
*2 Select [LOAD] or [SAVE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE].
By scene le unit as selected in the main menu → [SCENE FILE] → [FILE SELECT]
*3 Select [LOAD] or [SAVE] in the main menu → [CARD FUNCTIONS] → [SCENE FILE].
[F1:] to [F6:] at once
r User le
*1
*2
*3
[USER FILE] (including [USER MENU])(Factory settings)
The camera
(Current value)
(Value saved on the camera)
[USER FILE] (including [USER MENU])
[USER FILE] (including [USER MENU])
SD memory card
User file 1
User file 8
*1 Select [INITIALIZE] in the main menu → [OTHER FUNCTIONS] → [USER FILE].
*2 Select [LOAD] or [SAVE] in the main menu → [OTHER FUNCTIONS] → [USER FILE].
*3 Select [LOAD] or [SAVE] in the main menu → [CARD FUNCTIONS] → [USER FILE].
Handling SD memory cards
The SD memory card can be removed and inserted, either before or after the power is turned on.