– 15 –
Chapter 1 Overview — What you can do with this camera
Connecting to the remote operation panel (AK-HRP200G)
You can remote control some functions by connecting the remote operation panel AK-HRP200G (optional) using a LAN cable.
LAN
AK-HRP200G
Connecting to monitor
A monitor can be connected to output images.
Audio pin cable*
1
HDMI cable*
2
BNC cable (composite/HD SDI/SD SDI)*
3
Monitor
*1 Cables are optionally available. They are not supplied with the camera.
*2 Use an HDMI cable (optional) with double shielding. For the HDMI cable, using Panasonic HDMI cable is recommended.
*3 For the BNC cable (optional) connected to the <SDI OUT> terminal, prepare a double-shielded cable equivalent to 5C-FB.
Connecting to the network
Wired LAN connection
The following operations are available on your computer via LAN terminal:
f Camera status check
f Thumbnail image check
f Proxy playback
f Download of proxy le/clip management information
f Displaying/editing of metadata
f Adding/deleting of metadata (shot mark or text memo)
f Camera remote control (collective operations of recording control and time code/user bits)
In addition, the following operations are available via the LAN terminal.
f Transferring of clips with the FTP client function
f Remote control function using the Remote Operation Panel (AK-HRP200G)
Connection using wireless LAN and 4G/LTE
Attaching the wireless module AJ-WM30 (optional) to the <USB2.0 HOST> terminal (sub-host) of the camera allows you to connect the camera via
wireless LAN (IEEE 802.11).
The following operations are available using your tablet, smartphone, and computer.
f Camera status check
f Thumbnail image check
f Proxy playback
f Displaying/editing of metadata
f Adding/deleting of metadata (shot mark or text memo)
f Camera remote control (collective operations of recording control and time code/user bits)
In addition, clips can be transferred by the FTP client function via wireless LAN (access point connection) or 4G/LTE.
To Next Page
Loading...
