Panasonic AJ-PX270 - Page 94

– 94 –
Chapter 4 Shooting — Handling setting data
Saving scene le setting data to the camera memory
Fig. 1
1
Select the file to be saved in the main menu → [SCENE FILE] → [FILE SELECT] and press the control stick (or <SEL/PUSH SET>
dial button).
2
Select [SAVE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE] and press the control stick (or <SEL/PUSH SET>
dial button). (Fig. 1)
A conrmation screen is displayed.
3
Select [YES] and press the control stick (or <SEL/PUSH SET> dial button).
The selected scene le is saved to the camera.
Loading the scene le saved in the camera
1
Select the file to be loaded in the main menu → [SCENE FILE] → [FILE SELECT] and press the control stick (or <SEL/PUSH SET>
dial button).
2
Select [LOAD] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE] and press the control stick (or <SEL/PUSH SET>
dial button).
The conrmation screen is displayed.
3
Select [YES] and press the control stick (or <SEL/PUSH SET> dial button).
The selected scene le is loaded from the camera.
Restoring the scene le setting data to the factory settings
1
Select the file to be restored to the factory settings in the main menu → [SCENE FILE] → [FILE SELECT] and press the control
stick (or <SEL/PUSH SET> dial button).
2
Select [INITIALIZE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE] and press the control stick (or <SEL/PUSH
SET> dial button).
The conrmation screen is displayed.
3
Select [YES] and press the control stick (or <SEL/PUSH SET> dial button).
The selected scene le is restored to the factory settings.
Changing the scene le title
1
Select the file to change the title in the main menu → [SCENE FILE] → [FILE SELECT] and press the control stick (or <SEL/PUSH
SET> dial button).
2
Select [NAME EDIT] in the main menu → [SCENE FILE] and press the control stick (or <SEL/PUSH SET> dial button).
The title entry screen and keyboard are displayed.
3
Enter desired characters on the keyboard using the control stick (or <SEL/PUSH SET> dial button).
4
Select [OK] and press the control stick (or <SEL/PUSH SET> dial button).
The le name is updated.