Panasonic AUTO-LOGIC EASA-PHONE KX-T1450BA

Other Features
Erasing the Recorded Messages
--------
After you have played back the recorded messages, you can erase them by simply
pressing the ICM ERASE button.
1 Press ICM ERASE until a beep is heard.
•The unit will erase the recorded
messages while the tape Is rewinding.
NOTE:
The tape can be erased even if the
record-prevention (knock-out) tabs have been
removed.
Monitoring the Incoming Calls
While an Incoming Message is being recorded, you can monitor it. Then you may
choose to lift the telephone handset and speak to the caller directly.
1 Adjust the volume control.
If you want to talk to the caller during
recording of the ICM, lift the telephone
handset and talk.
The unit will automatically stop recording and
be ready to answer the next phone call.
-12-