Panasonic AUTO-LOGIC EASA-PHONE KX-T1450BA

How to Operate from a Remote Phone
Playing Back Messages
———-- 4
You can listen to the recorded messages by simply pressing your own code number.
1 Call your unit, and press the Code No. (2 digits) during the OGM.
•A beep will sound, then other beeps will sound to tell you the
number of recorded messages, up to 8 times.
•The unit will rewind the tape to the beginning. After a series of
short beeps, you will hear all the messages on the tape.
2 Listen to the recorded messages.
•3 beeps will be heard after the last message.
3 H a n g up.
•All calls will be saved automatically.
Playing Back Newly-Recorded Messages
(Memory Playback)
When you have already heard the messages from a remote phone, you can skip them
and listen to the newly-recorded messages.
1 Call your unit, and press the Code No. during the OGM.
CHI
4
V-” \
u
Press “4” right after you hear the beep tones indicating the
number of the recorded messages.
•The unit will play back the new messages.
•Even during the playback of previously heard messages, you
can skip them by pressing “4”.
-14-