96
Web screen configurations
(continued)
Recommended network setting for internet
Perform the recommended settings to connect the camera to the Internet.
Clicking the [Set] button displays a dialog box telling the user that item settings will be changed. After confirming this, click the
[OK] button.
• [JPEG/H.264] tab of camera screen [Image/Audio]
Priority
Mode
Other than IP(4K) IP(4K)
HDR Off “Low” or “High” —
JPEG(1) Image capture size: 640×360 Image capture size: 640×360 Image capture size: 640×360
JPEG(2) Image capture size: 320×180 JPEG transmission: Off
JPEG(3) JPEG transmission: Off JPEG transmission: Off
H.264(1)*
Internet mode (over HTTP): On Internet mode (over HTTP): On Internet mode (over HTTP): On
Image capture size: 1280×720 Image capture size: 640×360
Frame rate: 5fps
Max bit rate (per client):
Max 8192 kbps, Min 2048 kbps
Max bit rate (per client):
Max 4096 kbps, Min 1024 kbps
Transmission priority: Best effort Transmission priority: Best effort
H.264(2)*
Internet mode (over HTTP): On H.264 transmission: Off
Image capture size: 640×360
Max bit rate (per client):
Max 4096 kbps, Min 1024 kbps
Transmission priority: Best effort
H.264(3)*
Internet mode (over HTTP): On H.264 transmission: Off
Image capture size: 320×180
Max bit rate (per client):
Max 4096 kbps, Min 512 kbps
Transmission priority: Best effort
H.264(4)*
H.264 transmission: Off
* Cannot be selected when the Priority Mode is other than “IP” or “IP(4K)” because IP transmission of H.264 images is not
supported.
• “Network” tab in the Network setting screen
Common
IPv6/IPv4
Max RTP packet size: Limited(1280byte)
HTTP max segment size(MSS): Limited(1280byte)