Frame rate [24fps, 25fps, 30fps, 50fps, 60fps]
Set the frame rate for H.265 images.
59.94Hz 30fps, 60fps
50Hz 25fps, 50fps
24/23.98Hz 24fps
Factory settings:
For 59.94Hz: 30fps
For 50Hz: 25fps
For 24/23.98Hz: 24fps
<NOTE>
• [60fps(50fps)] cannot be selected when the video format is
[29.97p(25p)].
Max bit rate(per client)
[512kbps, 768kbps, 1024kbps, 1536kbps, 2048kbps,
3072kbps, 4096kbps, 6144kbps, 8192kbps, 10240kbps,
12288kbps, 14336kbps, 16384kbps, 20480kbps, 24576kbps]
Specify the H.265 bit rate per client.
Factory settings:
H.265(1): 14336kbps
H.265(2): 8192kbps
Transmission type
The same as H.264 Transmission type (→ page 103).
Unicast port(Image)
The same as H.264 Unicast port(Image) (→ page 104).
Unicast port(Audio)
The same as H.264 Unicast port(Audio) (→ page 104).
Multicast address
The same as H.264 Multicast address (→ page 104).
Multicast port
The same as H.264 Multicast port (→ page 104).
Multicast TTL/HOPLimit
The same as H.264 Multicast TTL/HOPLimit (→ page 104).
z RTMP
Make RTMP/RTMPS transmission settings.
Server setup
The setting is confirmed with the [Set] button.
<NOTE>
• Switch to the appropriate method of registering RTMP/RTMPS
transmission server information suited to the setting information
notified from the RTMP/RTMPS transmission server you are using.
• The Stream Key setting field is displayed only when [Type2] is set.
• When performing RTMP transmissions, set the Server URL and
Stream key acquired from the external application, and then click
the [start] button for [SRT/MPEG2-TS/RTMP] in the live screen
[Live].
• When performing RTMP transmissions, enable connection with the
network in the [Network] screen.
URL type [Type1, Type2]
Select the method for registering the information for the RTMP/
RTMPS transmission server.
Type1 Specify to set the server URL and RTMP/RTMPS stream
key as a set in [Server URL].
Type2 Specify to individually set the server URL and RTMP/
RTMPS stream key in [Server URL] and [Stream Key].
URL
Server URL
Set the URL for the RTMP/RTMPS server to be transmitted to.
Stream key
The stream key obtained from the RTMP/RTMPS server is set
during streaming only when the service is set to [Type2].
Streaming format
Make settings for H.264 images for use in RTMP/RTMPS
transmission.
The setting is confirmed with the [Set] button.
Refer to the explanation for H.264 (→ page 102) for information
about Image capture size, Frame rate and Max bit rate(per client).
<NOTE>
• Streaming format settings cannot be changed during RTMP/RTMPS
transmissions.
• When [IP(UDP)] of [Tracking Data Output] is set to [On], video
transmission via IP may be delayed or the video may suffer frame
loss. (→ page 122)
We recommend [IP(UDP)] of [Tracking Data Output] is set to [Off]
during RTMP/RTMPS transmission.
• Set the Streaming format to the settings recommended for the
transmission destination server. Visit the publisher’s website or
contact them about the recommended values.
104 105
Web screen configurations (continued)
To Next Page
Loading...
