Panasonic AW-UE80WP - Preset 2;2 Screen; Preset Acceleration Screen

Preset 2/2 screen
Preset 2/2
Preset Iris Off
Preset Shutter On
Preset Zoom Mode Mode A
Freeze During Preset Off
Return
Preset Iris [Off, On]
When the preset memory is played back, set whether the
reproduction of the values in the various menus related to Iris is off/
on.
When set to [On], the values set in the various menus below are
reproduced when preset memory is played back.
- Picture Level
- Iris Mode
- Auto Iris Speed
- Auto Iris Window
<NOTE>
• Its setting takes effect when [Mode A] or [Mode B] has been
selected as the [Preset Scope] setting.
Preset Shutter [Off, On]
When the preset memory is played back, set whether the
reproduction of the Shutter setting value is Off/On.
<NOTE>
• This is enabled when [Preset Scope] is [Mode A].
• The Shutter values are reproduced only when the frame rate when
the preset memory was registered and the frame rate when playing
back the preset memory match.
Preset Zoom Mode [Mode A, Mode B]
Select the zoom operation for when preset memory is recalled.
Mode A Perform the zoom operation in line with the pan/tilt
operation.
Mode B Perform the zoom operation quicker than the pan/tilt
operation.
Freeze During Preset [Off, On]
Turn the function for freezing images during preset playback off/on.
When this is set to [On], preset playback is performed with a still of
the image immediately preceding the start of preset playback being
output. The image freeze is released when preset playback is finished.
Return
Return to the previous menu level.
Preset Acceleration screen
Preset Acceleration
Preset Acceleration Auto
Rise S-Curve 15
Fall S-Curve 15
Rise Acceleration 128
Fall Acceleration 128
Rise Ramp Time 0.1s
Fall Ramp Time 0.1s
Return
Preset Acceleration [Manual, Auto]
Sets whether to perform advance setting for acceleration and
deceleration speed etc. during start/stop of preset playback.
Manual Makes the advance settings for acceleration speed etc.
when starting/stopping preset playback.
Auto Automatically operates acceleration speed etc. when
starting/stopping preset playback.
Rise S-Curve [0 to 30]
Sets the S-curve for pan/tilt acceleration operation in 31 steps. (The S
becomes stronger, the greater the number)
During the acceleration operation for operating at the specified speed
or time during pan/tilt operations by preset playback, the acceleration
process is performed using the S-curve specified in this setting.
This is enabled only when [Preset Acceleration] is [Manual].
<NOTE>
• In order to limit the acceleration response, in the S-curve step, as
the acceleration speed rises, the limit is automatically applied.
Fall S-Curve [0 to 30]
Sets the S-curve for pan/tilt deceleration operation in 31 steps. (The S
becomes stronger, the greater the number)
During the fall acceleration operation for operating at the specified
speed or time during pan/tilt operations by preset playback, the
deceleration process is performed using the S-curve specified in this
setting.
This is enabled only when [Preset Acceleration] is [Manual].
<NOTE>
• In order to limit the deceleration response, in the S-curve step, as
the deceleration speed rises, the limit is automatically applied.
Rise Acceleration [1 to 255]
Sets the acceleration speed for pan/tilt acceleration operation in 255
steps. (The acceleration speed increases as the number increases)
During the acceleration operation for operating at the specified speed
or time during pan/tilt operations by preset playback, the acceleration
process is performed using the acceleration speed specified in this
setting.
This is enabled only when [Preset Acceleration] is [Manual] and
[Preset Speed Unit] is [Speed Table].
<NOTE>
• As the speed specified for [Preset Speed] is given priority as the
maximum speed attained in preset playback, if the acceleration
speed specified here is small, this functionality may not operate as
specified.
Fall Acceleration [1 to 255]
Sets the deceleration speed for pan/tilt deceleration operation in 255
steps. (The deceleration speed increases as the number increases)
During the deceleration operation for operating at the specified speed
or time during pan/tilt operations by preset playback, the deceleration
process is performed using the deceleration speed specified in this
setting.
This is enabled only when [Preset Acceleration] is [Manual] and
[Preset Speed Unit] is [Speed Table].
<NOTE>
• As the speed specified for [Preset Speed] is given priority as the
maximum speed attained in preset playback, if the deceleration
speed specified here is small, this functionality may not operate as
specified.
66 67
Camera menu items (continued)