Preset position screen [Preset position]
z Preset
The setting is confirmed with the [SET] button.
When a preset thumbnail is clicked, the camera
moves to face towards a preset position that was
registered beforehand.
You can select Home and Preset001 to Preset100.
Preset numbers are displayed in green when they
have had a preset position registered in them.
(Preset name)
Preset names are displayed.
During the preset registration mode, you can select
a preset name and change the display name.
You can enter between 1 to 15 characters.
The characters available are 0 to 9, A to Z, a to z,
spaces, and underscores (
_
).
[1] - [12]
Switches the page of the displayed preset
thumbnails.
[Home]
Move to home position.
[SET]
The unit moves to the preset registration mode.
When a preset thumbnail is clicked in the preset
registration mode, it is registered in the preset
position specified by the current condition.
[DEL]
The unit moves to the preset delete mode.
When a preset thumbnail is clicked in the preset
delete mode, the specified preset position settings
are deleted.
[Save]
Acquire JPEG images (still images) and save them.
They can be saved by specifying [PICT001] to
[PICT100] or [STIL001] to [STIL005] in the save
destination.
If [PICT
***
] is selected, the thumbnail image for the
corresponding preset number can be updated, and
if [STIL001] to [STIL005] is selected, you can save
still images with a higher resolution.
Furthermore, when [STIL001] to [STIL005] have
been selected, the [Load] and [DEL] buttons are
activated and it is possible to load and delete the
still images you have saved.
118 119
Web screen configurations (continued)
To Next Page
Loading...
