6. Press the <M> button.
The shooting mode blinks.
7. Press the <4> or <5> button to select the shooting mode
(Full Auto, Scene1, Scene2 or Scene3) to be used, and
press the <M> button to enter the selection.
8. Press and hold the <MENU> button for about 2 seconds.
The camera menu display is exited.
When performing operations from a controller
When using an AW‑RP150 or AW‑RP60
For details, refer to the operating instructions for the controller.
34
Selecting the shooting modes (scene files) (continued)
To Next Page
Loading...
