Camera menu Item Factory setting Selection items
Top Menu Preset Preset 1/2 Preset Speed Unit Speed Table Speed Table, Time
Preset Speed Table Fast Slow, Fast
Preset Speed
(When [Preset
Speed Unit] is set to
[Speed Table])
20 1 to 30
Preset Speed
(When [Preset
Speed Unit] is set to
[Time])
20s 1s to 99s
Preset Acceleration Setting
Preset Acceleration Auto Manual, Auto
Rise S-Curve 15 0 to 30
Fall S-Curve 15 0 to 30
Rise
Acceleration
128 1 to 255
Fall Acceleration 128 1 to 255
Rise Ramp Time 0.1s 0.1s to 10.0s
Fall Ramp Time 0.1s 0.1s to 10.0s
Preset Scope Mode A Mode A, Mode B, Mode C
Preset Digital
Extender
Off Off, On
Preset Thumbnail
Update
On Off, On
Preset Name Reset Reset, Hold
Preset 2/2 Preset Iris Off Off, On
Preset Shutter On Off, On
Preset Zoom Mode Mode A Mode A, Mode B
Freeze During Preset Off Off, On
Maintenance
Firmware Version Firmware
Version
1/2
System Version Version at shipping - - -
CPU Software
Main/Network Version at shipping - - -
Camera Version at shipping - - -
Lens Version at shipping - - -
Servo Version at shipping - - -
Firmware
Version
2/2
EEPROM
Main/Network Version at shipping - - -
FPGA
Network Version at shipping - - -
Enc Version at shipping - - -
Logic Version at shipping - - -
IP Network IP Address 192.168.0.10 - - -
Subnet Mask 255.255.255.0 - - -
Default Gateway 192.168.0.1 - - -
Scene Copy From Scene1 Full Auto, Scene1, Scene2, Scene3
To Scene1 Full Auto, Scene1, Scene2, Scene3
Initialize All - - - CANCEL, OK
Scene All - - - CANCEL, OK
Full Auto - - - CANCEL, OK
Scene1 - - - CANCEL, OK
Scene2 - - - CANCEL, OK
Scene3 - - - CANCEL, OK
Hour Meter Operation 00000000 - - -
Fan 00000000 - - -
HDMI Status Connect - - - - - -
Format - - - - - -
Video Sampling - - - - - -
Monitor - - - - - -
Error Status Lens No Error No Error, Error
Pan/Tilt No Error No Error, Error
Fan No Error No Error, Error
Temperature No Error No Error, High Temperature, Sensor Error
82
Camera menu item table (continued)
To Next Page
Loading...
