Operating Instructions
18
1.2.4 Setting Home Position/Sensor Position/Preset
Button
Registering Home Position/Sensor Position
A home position or sensor position can be registered. When restarted, the camera
takes a home position. If the Lens Position When Triggered setting is set (see page
69), the camera takes a sensor position after the pyroelectric infrared sensor
detects temperature differences.
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
3. Click the home position button or the
sensor position button.
4. Click [Save] to register, or click [Back]
and [Cancel] to cancel.
• If "Success!" is displayed, click
[Back].
Sensor
Position
Pan/Tilt
Program
Home
Position
To Next Page
Loading...
