Operating Instructions
80
2.16 Changing Indicator Display
The Indicator Control page allows you to select Indicator operation. Indicator has
four options.
•Always on
• Turn the indicator on when the camera is accessed.
• Turn the indicator on during sensor reaction.
• Always off
1. Click [Indicator Control] on the Setup page.
2. Select indicator option.
• Clicking [Cancel] cancels your settings without saving changes.
Notes
• See page 8 in the Installation/Troubleshooting for indicator display.
• Selecting [Never turn indicator on] keeps indicator always off.
3. Click [Save] when finished.
• New settings are saved.
• When finished, "Success!" is displayed.
4. Click [Go to Indicator Control page].
• The Indicator Control page is displayed.
To Next Page
Loading...
