Operating Instructions
8
1 Camera Monitoring
1.1 Accessing the Camera
1. Start up the web browser on your PC.
2. Enter "http://IP Address (or URL):Port Number" on the address bar, and
press [Enter] on the keyboard.
• When port number is 80 (default), you do not need to enter port number.
See page
33 for details about port number.
• If the camera image is not displayed, see page 25 of the Installation/
Troubleshooting.
3. The Enter Network Password window is displayed, and enter the user name
and password that were set, and click [OK].
Note
When [Permit access from guest users] is set on the Security: Administrator
page, the authentication window will not be displayed.
E.g. http://192.168.0.253:50000
(or http://XXXXX.viewnetcam.com:50000)
To Next Page
Loading...
