Panasonic BL-C30

Operating Instructions
60
2.13 Buffering or Transferring Images by Timer
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
1. Click [Buffer/Transfer] on the Setup page.
2. Click No. to enable buffer/transfer.
3. Check [Enable Image Buffer/Transfer], select [Timer] for trigger, and click
[Next>].
• Click [Delete Buffered Images] to delete this buffered images.
• Click [Save] to save the settings. The buffered images are deleted.
• Clicking [Cancel] takes you back to the Image Buffer/Transfer page without
saving changes.
Setting Description
Enable Image
Buffer/Transfer
• Check the box to enable the buffer/transfer. Clear the box
to disable it.
Trigger • Selecting [Timer] enables the camera to buffer/transfer the
image by timer.
• Selecting [Sensor] enables the camera to buffer/transfer
the image by sensor.