Operating Instructions
21
Changing or Deleting the Settings
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
• When deleting, this step is not
necessary.
3. Click the home position, sensor position
or a preset button (1—8).
4. Click [Save] after setting the preset
name or click [Delete].
• If you quit to change or delete
settings, click [Back], and then
[Cancel].
• If "Success!" is displayed, click
[Back].
Note
The home position or the sensor position
cannot be deleted, and these position
names cannot be changed either.
Pan/Tilt
Changing
the name
Preset
Preset
number
The deleted
button turns
white.
Sensor
Position
Home
Position
To Next Page
Loading...
