30
Installing/Removing the RAM Module
RAM module specifications
Use a RAM module meeting the RAM module specifications below. If a module is
used that does not meet the specifications, there are cases in which data may
become unusable or the computer may not operate properly.
RAM modules are extremely sensitive to static electricity. There are cases where
static electricity generated by the human body has adversely affected such mod-
ules. In addition, it is easy to damage the RAM modules or internal components
of the computer. Therefore, when installing or removing a RAM module, handle
the module with extreme care.
144 pins, SO-DIMM, 3.3 V, SDRAM, PC100 Compliant
Removing the RAM module
Open the left and right hooks.
Gently remove the RAM module from the slot.
Adding Memory
4 Put the cover back into place( page 26)
RAM Module
1 Power off your computer ( “Starting Up/Shutting Down”)
Do not shut down using the suspend* or hibernation mode.
* With Windows 98, the “Suspend” is called “Standby”.
2 Remove the cover ( page 25)
3 Installing the RAM module
Slide in the module at an angle.
Snap the module into place by pushing down on it.
Only a RAM card designed for PC100 can be added.
Hooks
RAM Module
CAUTION
To Next Page
Loading...
