32
2 Connect the printer to your computer
1 Power off your computer ( “Starting Up/Shutting Down”)
Do not shut down using the suspend* or hibernation mode.
* With Windows 98, the “Suspend” is called “Standby”.
3 Turn on the printer, then turn on your computer with the
LCD panel opened
4 Setting your printer
Go to [My Computer] - [Printers]. Find your printer’s icon, double-click
on it, and click [Printer] - [Set as Default]. If no icon is available, select
[Add Printer] and then follow the on-screen instructions.
You may need to install a driver for your printer. Follow the on-screen
instructions and refer to the operation manual of the printer on how
to install the driver.
Parallel Port
Using a Printer
NOTE
To Next Page
Loading...
