37
USB Port
For more detailed information, refer to the operation manual of the USB device.
1 Power off your computer ( “Starting Up/Shutting Down”)
Do not shut down using the suspend* or hibernation mode.
2 Connect the USB device to your computer
Using USB Devices
When a USB device is connected, there are cases the suspend* or hiberna-
tion function will not operate in a normal manner due to the USB device. In
addition, a USB device may have to be removed temporarily and the com-
puter restarted in cases where the computer is unable to start up properly.
You may need to install a driver for your USB devices (for Windows 98).
Follow the on-screen instructions and refer to the operation manual for USB
devices on how to install the driver.
After [Add New Hardware Wizard] is completed:
1 In [Start] - [Run], type [c:\util\usbroot.bat] and then press [OK].
Follow the on-screen instructions.
2 When [Finished] is displayed in the title bar, press in the top right cor-
ner of the Window.
3 Disconnect the USB device, then connect the USB device again.
When [Add New Hardware Wizard] is displayed, install a driver for your
USB device again.
* With Windows 98, the “Suspend” is called “Standby”.
CAUTION
NOTE
To Next Page
Loading...
