Panasonic CF-27 Series

41
Setup Utility
Press F2 while [Press <F2> to enter SETUP] is displayed.
The Setup Utility will not run if F2 is not pressed soon after the computer
starts. In this case, you need to restart your computer.
If [Enter Password] is displayed, enter your password.
When entering the User Password, [Advanced] menu will not be displayed on the
main screen.
To display the [Advanced] menu:
1 Restart the computer and press F2 when [Press <F2> to enter SETUP]
is displayed.
2 When [Enter Password] is displayed, enter the Supervisor Password.
For more details, on-line help is available; press F1 .
Running the Setup Utility
Key Operations
* When starting up the Setup Utility with the User Password, this key is not available.
Closing the Setup Utility ( page 46)
press F2
To run the Setup Utility, you
need to restart your computer.
Press <F2> to enter SETUP
Upon seeing
this message
F1 :To display the corresponding “help” file.
Enter :To display sub-menu.
Esc :To display [Exit] menu.
:To move among the menus.
:To move among the items.
F5 F6 :To move among the values.
F9 * :To set default settings.
F10 :To save the settings and exit.
NOTE
NOTE