47
Technical Information
The network connection may be severed under the condition the power of the display
is OFF (for energy conservation purposes) and suspend (hibernation) mode. When
network or communication software is to be used, set [System standby], [Turn off
monitor] and [Turn off hard disks] (in [Start] - [Settings] - [Control Panel] - [Power
Management]) to [Never].
When the power saving function is running, communications software may malfunc-
tion. For example, communications may be halted if the suspend (hibernation) mode
is activated. The computer must be restarted if one of these modes is entered during
data communications.
Be sure that the power of the display is cut (for energy conservation purposes) or the
computer enters suspend (hibernation) mode after the communications software is
closed.
Network / Communication Software
To Next Page
Loading...
