Panasonic CF-27 Series

5
(To next page)
Touch Pad (Advanced)
Operate after pressing the two buttons simultaneously.
When releasing the auto scroll function:
One tap on the work surface.
or
Two quick taps, but on the
second tap leaving your fin-
ger down (applying pres-
sure) and moving it on the
work surface.
While holding down the
button, moving your fin-
ger on the work surface.
or
Basic Operation
Function
Touch Pad Operation
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Scroll*
2
Scroll a document
(rotate the wheel)
Auto Scroll*
2
Automatically scroll a
document
(move the mouse after
clicking the wheel)
or
Move the tip of your finger
lightly over the surface.
Wheel
Original
Wheel
Original
tapping
clicking
double-tapping
double-clicking
Wheel
Original
Wheel
Original
Wheel
Original
Wheel
Wheel
Original
Wheel
Original
Indicates an operation applicable to the Microsoft
®
IntelliMouse
TM
Wheel mode.
Indicates an operation applicable to the original mode.
Within the parentheses () are operations to follow when using an external Microsoft
®
IntelliMouse
TM
.
*
2
Indicates that the movements will differ depending on the application.
When a check mark is added for [use Drag
Lock]*
1
After the drag operation (above : left side), it is nec-
essary to determine the destination (e.g., location of
drop) by one tap. Under the condition no destination
is selected, do not use the suspend or hibernation
function. Nothing is shown on the display, even after
resuming from the suspend or hibernation mode.
In this case, the display will return after a tap or click
is made.
*
1
In [Start] - [Settings] - [Control Panel] - [Mouse] -
[Tap and Buttons]