Panasonic CF-27 Series - Page 43

43
Parameters
Advanced Menu
Serial port A:* [Enable]
Base I/O: [3F8/IRQ4]
Serial port B:* [Disable]
IrDA Port:* [Enable]
Base I/O: [3E8/IRQ11]
DMA: [DMA1]
Parallel port:* [Enable]
Mode: [Bi-directional]
Base I/O: [378/IRQ7]
Sound Controller: [Enable]
CardBus Controller A: [Enable]
Internal Modem: [Enable]
Setup Utility
* If [Enable] is set, sub items will be displayed.
( : Default)
Disable
Enable
3F8/IRQ4 2F8/IRQ3
Disable
Enable
Port Replicator*
2
MP (Multimedia Pocket) Device*
3
3F8/IRQ4 2F8/IRQ3 3E8/IRQ11 2E8/IRQ10
Disable
Enable
2F8/IRQ3 3E8/IRQ11
DMA0 DMA1
Disable
Enable
Uni-directional
Bi-directional
ECP
EPP
378/IRQ7 3BC/IRQ5*
4
DMA0 DMA1
Serial port A:*
1
Base I/O
Serial port B:*
1
Device
Base I/O
IrDA Port*
1
Base I/O
DMA
Parallel port:*
1
Mode
Base I/O
DMA*
5
*
1
If [Enable] is set, sub items will be displayed.
*
2
If the port replicator is not connected, [MP (Multimedia Pocket) Device] is enabled automati-
cally even when [Port Replicator] is selected.
*
3
Select [MP (Multimedia Pocket) Device] when you use an optional device installed in the
multimedia pocket.
*
4
This item will not be displayed when [Mode] is set to [EPP].
*
5
This item is displayed only when [Mode] is set to [ECP].
( To next page )
If starting up the Setup Utility with the User Password, [Advanced] Menu can not be set.