24
Security Measures
z The hard disk lock function only works with the internal hard disk. This function does
not work with the external hard disk.
Setting the Hard Disk Lock (enabling, disabling)
1 Run the Setup Utility. (Î page 81)
2 Using either Î or Í, select [Security].
3 Using either Ï or Ð, select [Hard Disk Lock] and press
Enter
.
4 Select [Enable] or [Disable].
z To enable the Hard Disk Lock
Select [Enable] and press
Enter
. At [Caution], press
Enter
.
z To disable the Hard Disk Lock
Select [Disable] and press
Enter
.
5 Press
F10
and select [Yes], then press
Enter
.
CAUTION
z To change your hard disk drive
• Contact Panasonic Technical Support.
• Before changing the hard disk, be sure to set the [Hard Disk Lock] to [Disable].
To Next Page
Loading...
