25
Security Measures
Disabling the floppy disk operation makes it impossible to read and write a floppy disk and to
start the computer from a floppy disk. This can prevent data from being accessed illegally or
overwritten accidentally using a floppy disk.
Procedure
1 Run the Setup Utility. (Î page 81)
2 Using either Î or Í, select [Security].
3 Using either Ï or Ð, select [MP Floppy Operation] and press
Enter
.
4 Select [Enable] or [Disable].
z To enable the floppy operation
Select [Enable] and press
Enter
.
z To disable the floppy operation
Select [Disable] and press
Enter
.
5 Press
F10
and select [Yes], then press
Enter
.
CAUTION
z The setting described above works only for the floppy disk drive in the multimedia
pocket; it does not work for the USB floppy disk.
Preventing theft or damage to data using a floppy disk
To Next Page
Loading...
